Panasonic AG-HPX500E - Manual (Page 81)

81
Handling setup data
C
h
ap
te
r 4 A
d
ju
st
m
en
ts a
n
d S
et
tin
g
s f
o
r R
ec
o
rd
in
g
■ Example2: Save the F1 scene file to the
camera.
1
Turn the JOG dial button to move the
cursor to the option LOAD/SAVE/INT.
Then, press the JOG dial button.
For details on menu operation, refer to [Using
the menus] (page 116).
OPERATION TYPE
FRAME RATE
SYNCRO SCAN
DETAIL LEVEL
V DETAIL LEVEL
LOAD/SAVE/INIT
DETAIL CORING
CHROMA LEVEL
1/60.3
PUSH MENU TO RETURN
SCENE F1
0
0
0
0
SAVE SAVE
INITIAL
LOAD
2
Turn the JOG dial button to move the
cursor to the option SAVE. Then, press
the JOG dial button.
OPERATION TYPE
FRAME RATE
SYNCRO SCAN
DETAIL LEVEL
V DETAIL LEVEL
LOAD/SAVE/INIT
DETAIL CORING
CHROMA LEVEL
1/60.3
PUSH MENU TO RETURN
SCENE F1
0
0
0
0
SAVE SAVE
INITIAL
LOAD
3
Turn the JOG dial button to move the
cursor to YES. Then, press the dial
button.
• To return to the menu level above, press the
MENU button.
YES
NO
SAVE ?
PUSH MENU TO RETURN
SCENE FILE
PUSH DIAL
• “PROCESSING” appears and the following
message is shown when all settings have
been completed.
SAVE
COMPLETED !
• After changing the scene file settings, to return to the
settings to the previously saved values, select LOAD
in step 2 and perform the operation described in
step 3.
• To return the scene file settings to their factory
defaults, select INITIAL in step 2 and perform the
operation described in step 3.
• To save and read user file settings or return them to
their factory defaults, open the setting menu OTHER
FUNCTIONS screen and run USER FILE in the same
way as when handling scene files.