Panasonic AG-HPX500E - Manual (Page 112)

112
Formatting P2 and SD Memory Cards
C
h
ap
te
r 6 M
an
ip
u
la
tin
g C
lip
s w
ith T
h
u
m
b
n
ail
s
Formatting P2 and SD Memory Cards
Formatting a P2 Card
1
Press the MODE button to enter the
MCR mode.
• The thumbnail screen appears on the LCD
monitor.
2
Press the thumbnail menu button to
open the menu.
3
From the menu bar, select OPERATION →
FORMAT.
• The following screen appears. Select the slot
number for the P2 card you want to format.
• Select EXIT if formatting is not required.
4
Use the CURSOR and SET buttons to
select YES in the screen that confirms
whether you want to format the card.
• The selected P2 card is formatted.
Formatting SD memory
cards
SD memory cards can also be formatted from the
thumbnail screen. With an SD memory card inserted
into the camera-recorder, perform the following
operation:
1
Press the MODE button to enter the
MCR mode.
• The thumbnail screen appears on the LCD
monitor.
2
Press the thumbnail menu button to
open the menu.
3
Select OPERATION → FORMAT.
• The following screen appears. Select “SD-
CARD”.
• Select “EXIT” if formatting is not required.
4
Use the CURSOR and SET buttons to
select YES in the screen that confirms
whether you want to format the card.
• The SD memory card is formatted.
• SD memory cards can also be formatted from the menu
screen.
For more information, see [Formatting, Writing and
Reading an SD memory card] (page 78).
• For an SDHC card, the space of 32 KB is already used.