Philips DVDR3435H - Manual (Page 34)

E
n
g
lis
h
4 5
A Connect the DV camcorder to the
DV IN jack on the front panel of this
recorder.
B Find the footage on the DV camcorder
that you want to start recording from
and set the camcorder to pause mode.
C Turn on the TV to the correct program
number for the recorder (e.g. ‘EXT’, ‘0’,
‘AV’.)
D Turn on the recorder and press DV/
USB on the remote control.
 An information box will be displayed.
Press REC MODE on the remote
control repeatedly to change the mode of
record quality.
E Press REC â to start recording and
press the PLAY button on the DV
camcorder to start playback.
l To pause the recording, press PAUSE
TV .
To resume recording, press OK .
again.
F To stop recording, press STOP Ç .
 A new title will be created when you
begin another recording.
To record directly to a
DVD recordable disc, see page -4.
Recording from an external
device (Camcorder/VCR/
DVD player)
A copy protection system has been built
into this recorder to prevent the transfer
of data from pre-recorded DVDs or
other copy protected material onto the
recordable DVD. You can only store the
contents in the temporary HDD storage
of this recorder.
Note: Set the preferred mode of record
quality before proceeding, see “Before
Recording - Default Recording Settings.”
A Connect the external device to this
recorder (see pages 18 ~ 1).
B Turn on the TV to the correct program
number for the recorder (e.g. ‘EXT’, ‘0’,
‘AV’).
C Press STANDBY-ON 2 to turn on
the recorder.
 If no TV program appears on the
screen, press TUNER on the remote
control.
D Press SOURCE repeatedly to select the
correct input channel that matches the
connected jack of the device.
{FP-CVBS } : VIDEO jack on the front.
{FP-SVIDEO} : S-VIDEO jack on the
front.
{RP-CVBS }: video jack on the back.
Record on Hard Disk
(continued)
TIPS: Set the appropriate mode of record quality for HDD recording. The same record quality will be transferred
from HDD to a recordable DVD, see page ~6.
Source
Pause TV
TUNER
REC â
{RP-SVIDEO}: S-video jack at the back.
{RP-YUV}: YUV jack at the back.
{CHXXX}: Antenna In at the back.
E Press REC â to start recording.
 You can also press REC â
repeatedly to increase the recording time
in 0-minute increments.
F Start playback on the connected device.
To pause the playback on the device,
press PAUSE TV.
To continue, press PAUSE TV again.
 You can use this function to avoid any
unwanted recording .
G To stop the recording before the
scheduled ending, press STOP Ç .
To record directly to a
recordable DVD disc, see page -4.
Record on Hard Disk
(continued)
TIPS: Set the appropriate mode of record quality for HDD recording. The same record quality will be transferred
from HDD to a recordable DVD, see page ~6.
System State: DV DV Stage: NO DV
Record to Hard Disc : As SP(5min /GB)
Elapsed Time: 00:00:00 Remaining Time: 1:5:5