Philips DVDR3435H - Manual (Page 12)

E
n
g
lis
h
1 1
Inserting Batteries
A Open the battery compartment.
B Insert two batteries type R0 or AAA,
following the indications (+-) inside
the compartment.
C Close the cover.
CAUTION!
– Remove batteries if they are
exhausted or if the remote control
will not be used for a long time.
– Do not mix batteries (old and new
or carbon and alkaline, etc.).
– Batteries contain chemical
substances and should be
disposed of properly.
Using the remote control to
operate the system
A Aim the remote control directly at the
remote sensor (iR) on the front panel.
B Select the source you want to control by
pressing the TUNER, HDD or DVD
button on the remote control.
C Select the desired function (for example
OPEN/CLOSE ç.)
Main Unit
a STANDBY-ON 2
– Turns on the recorder or switch to
standby mode.
b DISC TRAY
c OPEN CLOSE ç
– Opens/closes the disc tray.
d Display panel
– Show information about the current
status of the recorder.
e PLAY/PAUSE Å
– Play a disc
– Pauses the palyback or recording.
f STOPn
– Stops playback/recording.
g SOURCE
– In tuner or DVD REC mode, selects the
recorder’s video input source from the TV
channel or external sources.
( RP-CVBS, RP-SVIDEO, RP-YUV, CH-XXX,
FP-CVBS, FP-SVIDEO)
h CH+ / CH -
While in tuner mode, selects the next/ previous
TV channel.
i l REC
– Starts recording the current TV channel
or the current video input source.
– Red ring lights up while recording to the
HDD or DVD recordable disc is in
progress.
1
3
2
Getting Started