Polycom KIRK KWS6000 - Manual (Page 84)

KIRK Wireless Server 6000 Installation and Configuration Guide
8–10
Retrieving the Serial Number of the KIRK Handset
To enable service to the handset, the serial number must be programmed into
the system database via the web based Administration Page of the KWS6000.
(For more information, refer to “Registering KIRK Handsets” on page 13-1).
The serial number (IPEI number) of each handset is found either on a label,
which is placed behind the battery, or on the packaging label.
To show the serial number on the handset display (4020 Handset/4040 and
4080 Handset), press *99984*, and then press

; the serial number appears on
the handset display. Press < for 5 seconds to exit the menu.
To show the serial number on the handset display (5020/5040 Handset), press
Menu, select Status and then select Firmware version. Press exit to exit the
menu.