Polycom KIRK KWS6000 - Manual (Page 63)

Installing KIRK Repeater
7–7
Programming a KIRK Repeater with the KIRK
Programming Kit
This section provides information about:
•
“Content of the KIRK Programming Kit Repeater” on page 7-7
• “Set up of the Hardware for Repeater Programming” on page 7-8
• “Programming the KIRK Repeater with the ServiceTool” on page 7-8
Content of the KIRK Programming Kit Repeater
The Programming Kit Repeater (Part no. 02319508) consists of:
• splitter
• serial cable
Figure 7-4 Programming Kit Repeater
Note
For programming the repeater you also need the programming software
(ServiceTool) and the power supply for the repeater. The ServiceTool is
not part of the Programming Kit Repeater but can be downloaded from
www.polycom.com. The power supply for the repeater is to be ordered
separately (Part no. 84642602).
Splitter
Serial cable