Polycom KIRK KWS6000 - Manual (Page 18)

KIRK Wireless Server 6000 Installation and Configuration Guide
2–2
This section provides information about:
•
“Components of the KIRK Wireless Server 6000 Solution” on page 2-2
• “Requirements for the KIRK Wireless Server 6000 Solution” on page 2-7
• “Installation Prerequisites” on page 2-11
Components of the KIRK Wireless Server 6000 Solution
This section provides information about:
•
“KIRK Wireless Server 6000” on page 2-2
• “Wireless Bands” on page 2-3
• “KIRK Media Resource” on page 2-3
• “KIRK Base Station” on page 2-4
• “KIRK Repeater” on page 2-5
• “KIRK Handset” on page 2-6
• “KIRK Maintenance Software” on page 2-7
• “Administrative Computer” on page 2-7
KIRK Wireless Server 6000
Below you will find an overview of the system capacity of the KWS6000.
Table 2-1 Overview of System Capacity
Description Capacity
Max. number of base stations.
Note: A minimum of 1 base station is required, as the KWS6000
does not have a built-in radio.
255
Max. number of simultaneous calls on each base station 11
Max. number of repeaters on each base station 6
Max. number of simultaneous calls on a KWS6000/media resource
(G.711)
32
Max. number of media resources 32
Max. number of simultaneous calls with 32 media resources 1024