Polycom KIRK KWS6000 - Manual (Page 54)

KIRK Wireless Server 6000 Installation and Configuration Guide
6–4
KIRK Base Station LED Indicators
Front Cover
The base station front cover has one indicator describing the base station faults
and failures. The indicator is off when the base station is not powered. The
LED flashes when the base station initializes. The indicator is on when the base
station is operating.
Faceplate
Figure 6-3 LED Indicator Description - Faceplate
Table 6-2 LED Indicator Description - Front Cover
LED Indicator Meaning
Steady green OK and idle
Slow green flashing OK and active voice call
Fast green flashing Active, in operation with the
maximum active connections
(busy)
Slow red flashing Missing media resource or base
station (if it is a media resource:
missing connection to KWS6000)
Fast red flashing Error
Steady red Reset/shutdown in progress
Steady red for 5 seconds
followed by fast red flashing Reset to factory settings
LED Indicator Meaning
LINK/Activity Indicator - green Link layer software has
established connection
LINK/Activity Indicator - green
flashing Activity
Power Indicator - green KWS6000 is connected to Power