Polycom KIRK KWS6000 - Manual (Page 59)

Installing KIRK Repeater
7–3
KIRK Repeater - Appearance and Components
The repeater connection panel includes the following:
• Power supply connection (connection for programming the repeater as
well).
Note: The power supply for the repeater is to be ordered separately (Part
no. 84642602).
• Antenna connector for repeaters supplied with external antenna
connection.
Note: The external antenna incl. antenna cable is to be ordered separately
(part no. 02319505).
• LED that indicates whether or not the unit is functioning.
Figure 7-1 Repeater
KIRK Repeater LED Indicators
The repeater has one LED indicator describing the repeater operations: The
indicator is off when the repeater is not powered. When the LED flashes after
the repeater has been powered, sync has still not been established. As soon as
sync has been established the LED is on. Each time a handset connects to the
repeater, the LED flashes shortly. Each time a handset makes handover to a
repeater, the LED flashes shortly.
LED