Configuring a kirk wireless server 6000 using dhcp, General configuration, General configuration –13 – Polycom KIRK KWS6000 User Manual
Page 101

Configuring KIRK Wireless Server 6000
10–13
Configuring a KIRK Wireless Server 6000 Using DHCP
This section describes how to configure a KWS6000 using DHCP.
For information on accessing the web based Administration Page, refer to
“Accessing the Web Based Administration Page”
This section contains information about:
•
•
“Wireless Server Configuration”
•
“Built-In Media Resource Configuration”
•
•
General Configuration
Using DHCP the device request and obtain an available IP address from a
DHCP server. The device also obtain other parameters such as the default
gateway, subnet mask, DNS server, Time server and other IP parameters from
the DHCP server.
1
Click Configuration, and then click General.
Note
It is strongly recommended to configure the KWS6000 using a static IP
address.
Note
If the KWS6000 is configured using DHCP, it is necessary to assign a
reservation for the device on the DHCP server.