Subscribing kirk handsets, Kirk 4020/4040/4080-handset, Subscribing kirk handsets –3 – Polycom KIRK KWS6000 User Manual
Page 127: Kirk 4020/4040/4080-handset –3, For more information about auto login, refer to, Subscribing kirk, Handsets
KIRK Handset Registration and Subscription
13–3
For more general information about the IPEI number (serial number) and
how to retrieve it, refer to
“Retrieving the Serial Number of the KIRK
4
In the Access code field, type the authentication code (AC) (optional)
The authentication code is a subscription password of a maximum of eigth
digits, defined by the technicians, and can be used when connecting the
handset to a KWS6000. The authentication code is a subscription pin code
for the individual handset.
5
In the Standby text field, type a text to be displayed when the handset is
on hook (optional).
6
In the Username field, type the user part of a SIP URI, e.g. 1234 in John
Doe
7
In the Domain field, type the domain part of a SIP URI, e.g.
somecompany.com in John Doe
(optional).
Note: If not configured, the default domain will be used.
8
In the Displayname field, type the name to be displayed (caller ID), e.g.
John Doe in John Doe
9
In the Authentication user field, type a user name (optional).
10
The user name will override the Default User field under SIP
11
In the Authentication password field, type a password (optional).
The password will override the Default Password field under SIP
12
In the Local number field, type the local number of the handset
(optional).
Typing a local number makes it possible to send an MSF to the subscribed
handset.
13
Click Save to save the registration(s).
Subscribing KIRK Handsets
KIRK 4020/4040/4080-Handset
A handset can be subscribed to more systems and will automatically log on to
the relevant system. If a handset is subscribed to two or more systems, you can
use Auto Login type A to change between the systems automatically. If a
handset is subscribed to two systems only, you can use Auto Login type B to
change between the systems automatically.