Polycom KIRK KWS6000 - Manual (Page 128)

KIRK Wireless Server 6000 Installation and Configuration Guide
13–4
When to use Auto Login type A:
• Auto Login A should only be used in separate systems without overlaps.
If a handset looses signal from the system (the display showing Out of
Range), then after 20 seconds the handset will start searching for an
alternative system available from the Login list and automatically change
to this system.
Note: Using Auto Login A any call will be dropped when changing to an
alternative system.
When to use Auto Login type B:
• Auto Login B can be used in separate systems which are overlapping each
other.
As soon as the handset has measured a low RSSI signal 5 times in
succession, it will start up the Auto Login type B procedure and change to
an alternative system available.
Note: Using Auto Login B any call will be dropped when changing to an
alternative system.