Charging kirk handsets, Using the charger, Charging kirk handsets –6 – Polycom KIRK KWS6000 User Manual

Page 80: Using the charger –6, The handset ready for use. refer to

KIRK Wireless Server 6000 Installation and Configuration Guide

8–6

Insert battery with the label readable.

Replace the back cover by pressing the back cover back in the locked

position (when you hear a click the back cover is in position).

Charging KIRK Handsets

Using the Charger

Each handset is charged through the use of a handset charger, a compact

desktop unit designed to charge and automatically maintain the correct

battery charge levels and voltage.
The charger for the 4020/4040/4080 Handset is powered by an AC (115VAC

or 230VAC) adapter that supplies the 9VDC at 230mA charger requirement.
The charger for the 5020 Handset is powered by an AC (110VAC to 240VAC)

adapter that supplies the 8VDC at 350mA charger requirement.

Figure 8-3

Single Charger for 4020 Handset and 4040 Handset