Connecting your treo to your computer – Palm TREOTM 650 User Manual

Page 33

Text mode
Original mode

Setting up your computer :: 31

Connecting your Treo to your computer

1. Plug the AC charger into a wall outlet. If necessary connect an adapter.
2. Plug the USB sync cable into an available USB port or a powered USB hub on

your computer.

3. Connect the sync cable to the Multi-connector on the bottom of your Treo with

the HotSync

button facing up. Do not press the HotSync button until you are

instructed to do so.

4. Connect the charger cable to the Multi-connector on the sync cable.

For best performance, plug
your sync cable directly
into a USB port on your
computer. If you use a USB
hub, make sure it is a
powered hub.

A. USB sync cable
B. HotSync button

RowdyUG.book Page 31 Tuesday, December 7, 2004 9:58 AM