Card installation, Guidelines, Card installation -6 guidelines -6 – Panasonic CPC-EX User Manual

Page 34: Figure 3-5, Scc-b switch 4 -6

Text mode
Original mode

Chapter 3. Cabinet Installation

Section 300-Installation

3-6

DBS Manual - Revised April 2000

DBS-2.3/9.2-300

Card Installation

Guidelines

• Install the cards in the following order:

- TRK

- DEC

- AEC or API

- SCC

- CPC

- MFR or CBL

• If you are installing a CPC-A or CPC-AII card with an SCC-B card, set

SW4 to “Mode A.” The default setting is “Mode B,” which specifies that
CPC-B is used.

Figure 3-5. SCC-B Switch 4

Caution: Before handling printed circuit cards, discharge static electric-
ity by grounding yourself. Static electricity can damage components.
Turn off the power before installiing. Installing cards with the power on
can damage components.

(C PC -B

C PC -EX)

(C PC -A

C PC -A II)

SW 4

SC C -B C ard

M ode B

M ode A