Philips 765 - Manual (Page 14)

12
PROGRAM. . . . . . . . . . programs track numbers
DISPLAY . . . . . . . . . . . selects display information
Number keys 0 - 9 . . . selets a track by number
SHUFFLE . . . . . . . . . . . plays CD(RW) or program in random
order
Q . . . . . . . . . . . . . . . searches backward
PREVIOUS O . . . . . . . selects the beginning of a previous
track
STOP 9 . . . . . . . . . . . . stops CD(RW) and clears a program
PAUSE ;. . . . . . . . . . . interrupts CD(RW) play
NEXT P . . . . . . . . . . . selects the beginning of subsequent
PLAY 2 . . . . . . . . . . . . starts CD(RW) play
R . . . . . . . . . . . . . . .searches forward
REPEAT . . . . . . . . . . . . repeat play
CD . . . . . . . . . . . . . . . . select CD Player
CD-R. . . . . . . . . . . . . . . select CD Recorder
OPEN/CLOSE . . . . . . . .opens or closes the disc tray
When you press a button on the remote control, the indicator
on the display will light up.
Note: Unless indicated otherwise, all buttons are located on
the front of the CD Recorder/Player. If also provided
on the remote control, the corresponding buttons on
the remote control can be used after the CD Recorder
or the CD Player has been selected by pressing CD-R
or CD.
1 Press OPEN/CLOSE ((1111)) to open the disc tray.
2 Insert a CD, CD-R or, CD-RW in the appropriate recess in
the tray, label side up.
IMPORTANT:
For recording it is important that the blank disc be
completely free of dust particles or scratches.
(see Disc Maintenance, p.5.)
Unfinalized discs cannot be played in the CD Player
deck!
3 Gently push the front of the tray or press OPEN/CLOSE to
close the tray (see also Playing a CD).
CD-Recorder only
‹ The display will indicate the type of disc you have
inserted.
• If a CD-R is finalized the display will indicate C CD D .
• If a CD-RW is finalized it is still a CD-ReWritable and the
display will indicate C CD D R RE EW WR RIIT TA AB BLLE E .
If you insert a blank or partly-recorded CD-R or CD-RW,
the CD recorder will calibrate the disc for optimum recording.
During this process the display will first show
OPC and then
the number of audio tracks previously recorded. Calibration
can take up to 25 seconds.
Note: Only Audio CDs will be accepted. If a non-audio disc is
inserted, the display will indicate
noAUDIO.
REWRITABLE RECORDABLE CD
TIME TOTAL REM TIME
REPEAT 1 REPEAT 1
COPY PROHIBIT
DIG
TOTAL
PAUSE PAUSE PROG PROG OPT ANALOG
REM TRACK AUTO TRACK TRACK
REWRITABLE RECORDABLE CD
TIME TOTAL REM TIME
REPEAT 1 REPEAT 1
COPY PROHIBIT
DIG
TOTAL
PAUSE PAUSE PROG PROG OPT ANALOG
REM TRACK AUTO TRACK TRACK
Power On/O ff
DISP
OPEN CLOSE
RECORD
PLAY
PAUSE STOP
FINALIZE ERASE
C D - R E C O R D A B L E / R E W R I T A B L E
RE
RECOR
CD
DUBB 1
PAUSE
Inserting discs
CD SYNC SRC
SHUFFLE SHUFFLE SCAN
RECORD
FINALIZE
ERASE DUAL
TIME
TRACK OVER
TOTAL REM
DUBB 1
TOTAL REM TRA AUTO TRACK TRACK
PA US E
NE XT
PR EV .
SHUFFLE
REPEAT
OP EN /CL OS E
DISP LAY
PROG RAM
CDR
CD
1
2
3
4
5 7
8
0
6
9
y
STO
P
PLA
Y
5
6
Remote control commands
English
REMOTE CONTROL & INSERTING DISCS