Paxar Gold 6037EX User Manual

Page 76

4-40 Programmer’s Manual

Return Values

0 Successful.

703-793

A motion control error occurred. For errors
between 703-793. The operator corrects the
printer condition. Then the application must call
pclClearError to reset the Motion Control
subsystem. Refer to the MPCL

Packet

Reference Manual for more information.

Other non-zero

An error occurred. Refer to the MPCL

Packet

Reference Manual for more information.

Example

#include

#include "mmsultra.h"

void GetSupplyType(unsigned short *);

void GetStockLength(unsigned short *);

void GetStockWidth(unsigned short *);

unsigned short main(void)

{

unsigned short usStatus;

// Printer completion status

unsigned short usStockWidth; // Stk. width in 1/100th inches

unsigned short usStockLength; // Stk. length in 1/100th inches

unsigned short usSupplyType; // Supply type, 0 - 2

unsigned short status = 0;

// Print subsystem init. status

PRINTINIT rConfig;

// Print subsystem data struct.

status = pc

Init(NULL);

// Start Print subsystem

if (status != 0)

{

printf("Init Failed\nError: %d", status);

exit(1);

}

pclPaperInfo(&usStockLength, &usStockWidth,

&usSupplyType);

/* GetSupplyType is a programmer-written function */

GetSupplyType(&usSupplyType);