Paxar Gold 6037EX - Manual (Page 18)

2-4 Programmer’s Manual
LCD [options… ]
You can enter one or more of the following options on the
command line.
Y Enable the display. This option is the default.
N Disable the display.
F Set the display speed to fast.
S Set the display speed to slow.
C Clear display. Using this command is equivalent to
using the cls command.
D Backlight off.
L Backlight on.
K e y p a d
The following table describes the keypad’s data entry modes.
These are described in more detail in the Equipment Manual.
Mode Acceptable Keys
Numeric/Symbol Default. Numbers and Symbols
Alphabetic
Letters
Special Key Function Keys
Normally, when entering data, the operator must enter and exit
the modes manually. However, with the Kbd functions
described in Chapter 4, an application can also change between
the modes automatically.
Using the trigger is a special case of Function Key mode. See
“Reading Trigger Presses” in Chapter 6 for more information.