Paxar Gold 6037EX - Manual (Page 176)

6-2 Programmer’s Manual
An application can
♦ print single labels.
♦ print multiple labels.
♦ reprint labels.
No matter what printing method it uses, the application must
1. Initialize the Print subsystem using pc l Init.
2. Calibrate the supplies using pclCalibrate or
pclCalibratePaper (if using supplies other than fax paper).
3. Call pclPaperSetup if pclCalibratePaper was called in the
previous step.
4. Print using any method listed above.
5. Close the Print subsystem with pclClose.
Printing Single Labels
To print single labels, send a format and a batch (with a
quantity of 1) to the printer. SAMPLE1.C in the Samples sub-
directory illustrates printing single labels.
Printing Multiple Labels
An application can print multiple labels in a strip or in a loop.
When setting up a method to print multiple labels, you must
specify one of the following
♦ quantity
♦ peel mode/on-peel mode
♦ feed mode