Finalising a dvd+r, Protect disc against accidental recordings, Recording on a dvd+rw, dvd+r – Philips DVD Recorder/Hard Disk DVDR 725H/02 User Manual
Page 67: 62 finalising a dvd+r
62
Finalising a DVD+R
If recordings were stored (archived) on a DVD+R you have to finalise
it to make play back in a DVD-Player possible.
1 Press DISC MENU
B
and then STOP
h
N
to mark the first
title.
2 Press A
I
to go to the 'disc info screen'.
3 Press C
M
and select then the line 'Finalise disc' using
B
O
.
4 Confirm with OK
L
.
Protect disc against accidental recordings
To prevent an accidental erasing of important recordings, you can
protect the entire disc. It is only possible to protect the entire disc.
Protecting specific recordings on a disc is not possible.
What happens with DVD+R discs?
As long as these discs are not finalised,you can protect them against
accidental recording.
1 Insert the disc to be protected.
2 Press STOP h
N
on the remote control while the index screen
is displayed.
P
The first title is highlighted.
3 Press A
I
.
P
This takes you to the disc info screen.
4 Press C
M
.
Select 'Protection'.
Confirm with
C
M
.
5 Select 'Protected' using B
O
and confirm with OK
L
.
6 Press D
K
and then DISC MENU
B
to terminate.
P
The entire disc is now protected.
If you attempt to record on a protected disc, '
DISC LOCKED'
will appear on the display and 'Disc locked' on the screen.
If you decide later to record on this disc again,repeat the above steps
but select 'Unprotected' at step
5
.
ENGLISH
Recording on a DVD+RW, DVD+R