Philips DVD Recorder/Hard Disk DVDR 725H/02 - Manual (Page 64)

59
Automatic recording from a satellite receiver (sat recording)
With this function the recording on the DVD-Recorder can be
controlled via the scart socket.
You can use this function if you have a satellite receiver that can
control other devices via a scart cable and has a programming function
(timer). For more information, consult the instruction manual of your
satellite receiver.
1 Switch on the TV. If necessary, select the programme number for
the DVD recorder.
2 Press the BROWSER HDD H and then the SYSTEM
MENU A button on the remote control.
P The 'SYSTEM MENU' appears.
3 Select 'Preferences' with B O .
4 Press C M to select 'Recording'.
5 Select 'Satrecord' (second menu page) using B O .
6 Select 'On' using C M .
O To switch off the function, select 'Off' using C M .
7 To end, press SYSTEM MENU A .
8 Connect the EXT2 AUX-I/O M scart socket of the DVD
recorder with the corresponding scart socket of the satellite
receiver using a scart cable.
9 Program the satellite receiver with the desired data for recording
(programme number of the TV channel, start time and end time).
If necessary, also consult the instruction manual of your satellite
receiver.
0 Switch off the DVD recorder using STANDBY m 2 .
P In addition, 'SAT' will appear in the display to indicate that the
function is activated.
A If necessary switch the satellite receiver to standby. See the
instruction manual for the satellite receiver for details.
The DVD recorder is now ready for recording.
P The start and the end of the recording will be controlled via
the EXT2 AUX-I/O
M scart socket.
Recording on the HDD