Philips DVD Recorder/Hard Disk DVDR 725H/02 - Manual (Page 34)

29
Sorting and deleting TV channels manually
With this function you can rearrange the TV channels already stored or
to delete TV channels you don't want or those with poor reception.
Preparation:
•) The TV is switched on, and if necessary, the programme number for
the DVD recorder has been selected.
•) the DVD recorder is switched on.
1 Press the BROWSER HDD H button and then the SYSTEM
MENU A button on the remote control.
P The 'SYSTEM MENU' appears.
2 Select 'Setup' using B O .
3 Press C M to select 'System'.
4 Select the line 'Installation' using B O and confirm with
C M .
P A message appears on the screen that the change of this
setting will flush the 'Time Shift Buffer'.
O If the 'Time Shift Buffer ' contains important recordings, save
them with the REC/OTR
n 1 button first. Refer to the
chapter 'The Time Shift Buffer'.
5 Select 'Yes' with D K and confirm with OK L .
O If the message window was closed, confirm the line with
C M again.
6 Select 'SortTV channels' using B O or A I and confirm
with C M .
Installation
Sort TV channels
...
• P01 BBC1
P02 BBC2
P03 ITV
P04
P05
P06
...
To sort
Press ? To exit press
SYSTEM MENU
7 Using B O or A I select the TV channel that you want to
delete or whose order you want to change.
8 Confirm with C M .
O Deleting TV channels
Unwanted channels or those with poor reception can be
deleted using the red function button
D .
9 Using B O or A I , shift the TV channel to the desired
position and press the D K button.
P
The DVD recorder will insert the TV channel.
0 Repeat steps 7 to 9 until you have resorted/deleted all the TV
channels you want.
A To store, press OK L .
B To end, press SYSTEM MENU A .
a 'Switch off recorder, new preset' appears on the screen
b In order to transfer the new TV channel order to the GUIDE Plus+ ®
system,it is necessary to switch off the DVD recorder
( STANDBY
m 2 ). Wait for approx. 4 minutes before you switch
the DVD recorder on again.
b If this message reappears after you switch on the DVD recorder,it
was not possible to complete the transfer process.
Switch off the DVD recorder using STANDBY
m 2 .
Additional installation features