Planet Technology WGSW-2620P User Manual
Page 80
1. Select
2.
Radius Server IP:
set the Radius Server IP address.
3.
Shared Key:
set an encryption key for using during authentication sessions with the specified
radius server. This key must match the encryption key used on the Radius Server.
4.
NAS, Identifier:
set the identifier for the radius client.
5.
Server Port:
set the UDP destination port for authentication requests to the specified Radius
Server.
6.
Accounting Port:
set the UDP destination port for accounting requests to the specified Radius
Server.
7. Select
802.1x System Configuration interface
3.4.8.5.3 Per Port Setting
The State provides Disable, Accept, Reject and Authorize. Use “Space” key change the state value.
Reject:
the specified port is required to be held in the unauthorized state.
Accept:
the specified port is required to be held in the Authorized state.
Authorized:
the specified port is set to the Authorized or Unauthorized state in accordance with
the outcome of an authentication exchange between the Supplicant and the authentication server.
Disable:
The specified port is required to be held in the Authorized state.