Planet Technology WGSW-2620P - Manual (Page 19)

for speed 100)
(The 1000Base-FX
module only supported
for speed 1000 & auto)
flowcontrol on or
no flowcontrol
Interface
configuratio
n mode
Use the flow control
configuration command
on Ethernet ports to
control traffic rates during
congestion.
Use the no form of this
command to disable
security on the port.
On
Switch (config)#
interface
fastEthernet 0/1
Switch (config-if)#
flowcontrol on
security on or no
security
Interface
configuratio
n mode
Use the security
configuration command
on Ethernet ports.
Use the no form of this
command to disable
security on the port.
Disable
Switch (config)#
interface
fastEthernet 0/1
Switch (config-if)#
security on
priority on [hi | low]
or no priority
Interface
configuratio
n mode
Use the priority
configuration command
on Ethernet ports.
Use the no form of this
command to disable
security on the port.
Disable
Switch (config)#
interface
fastEthernet 0/1
Switch (config-if)#
priority on hi