Planet Technology WGSW-2620P - Manual (Page 15)

3.3.2 Commands Set List
3.3.2.1 System Commands Set
Commands
Command
Level
Description Defaults Example
system name
[systemname]
Global
configuration
mode
Set switch system name
string
Switch (config)#
system name xxx
system
location
[system
location]
Global
configuration
mode
Set switch system location
string
Switch (config)#
system location xxx
system
description
[systemdescrip
tion]
Global
configuration
mode
Set switch system
description string
Switch (config)#
system description
xxx
system contact
[systemcontact
]
Global
configuration
mode
Set switch system contact
window string
Switch (config)#
system contact xxx
ip address
[ip-address]
[subnet-mask ]
[ gateway]
Global
configuration
mode
Use the ip address interface
configuration command to
set an IP address for a
switch. Use the no form of
this command to remove an
IP address or to disable IP
processing.
Switch (config)# ip
address
192.168.0.100
255.255.255.0
192.168.0.254
reload
Global
configuration
mode
Halt and perform a cold
restart
Switch (config)#
reload