Planet Technology WGSW-2620P User Manual

Page 108

You will see the VLAN displays.

If there are many groups that over the limit of one page, you can click

to view

other VLAN groups.

7. Use

Delete

button to delete unwanted VLAN.

8. Use

Edit

button to modify existing VLAN group.

Note

If the trunk groups exist, you can see it (ex: Trunk1, Trunk2…) in select menu of ports, and

you can configure it is the member of the VLAN or not.

4.7.7.2 802.1Q VLAN

Tagged-based VLAN is an IEEE 802.1Q specification standard. Therefore, it is possible to create a VLAN

across devices from different switch venders. IEEE 802.1Q VLAN uses a technique to insert a "tag" into

the Ethernet frames. Tag contains a VLAN Identifier (VID) that indicates the VLAN numbers.

You can create Tag-based VLAN, and enable or disable GVRP protocol. There are 256 VLAN groups to

provide configure. Enable 802.1Q VLAN, the all ports on the switch belong to default VLAN, VID is 1. The

default VLAN can't be deleting.

GVRP allows automatic VLAN configuration between the switch and nodes. If the switch is connected to