Planet Technology WLS-1280 User Manual

Page 93

For WAP-4060:

Properties

SSID Broadcast:

Select this option to enable the SSID to broadcast in your network. When configuring

the network, it is suggested to enable this function but disable it when the configuration is complete.

With this enabled, someone could easily obtain the SSID information with the site survey software and

get unauthorized access to a private network. With this disabled, network security is enhanced and can

prevent the SSID from being seen on networked.

SSID Isolation:

Choose to isolate SSID or not.

Channel:

Select the appropriate channel from the list to correspond with your network settings; for

example, 1 to 11 channels are suitable for the North America area.

y Wireless Mode: Choose a suitable wireless mode from the drop-down menu.

y Transmission Rate:

The default is Auto. Available range is from 1 to 54Mbps. The rate of data

transmission should be set depending on the speed of your wireless network. You can select from a

range of transmission speed or you can keep the default setting, Auto, to make the Access Point