Planet Technology WLS-1280 - Manual (Page 125)

122
system also supports the SSH online connection for the setup. When using a null modem to connect to
the system console, we do not need to enter administrator’s password to enter the console management
interface. But connecting the system by SSH, we have to enter the username and password.
The username is “admin” and the default password is also “admin”, which is the same as for the web
management interface. You can use this option to change the administrator’s password. Even if you
forgot the password and are unable to log in the management interface from the web or the remote end of
the SSH, you can still use the null modem to connect the console management interface and set the
administrator’s password again.
Caution: Although it does not require a username and password for the connection via the serial port, the
same management interface can be accessed via SSH. Therefore, we recommend you to immediately
change PLANET WLS-1280 Admin username and password after logging in the system for the first time.
y Reload factory default
Choosing this option will reset the system configuration to the factory defaults.
y Restart Cipherium PLANET WLS-1280
Choosing this option will restart PLANET WLS-1280.