Appendix a – console interface – Planet Technology WLS-1280 User Manual
Page 123
120
5. Appendix A – Console Interface
Via this port to enter the console interface for the administrator to handle the problems and situations occurred
during operation.
1. To connect the console port of PLANET WLS-1280,
you need a console, modem cable and a terminal
simulation program, such as the Hyper Terminal.
2. If you use Hyper Terminal, please set the parameters
as 9600,8,n,1.
Caution: the main console is a menu-driven text interface with dialog boxes. Please use arrow keys on the
keyboard to browse the menu and press the Enter key to make selection or confirm what you enter.
3. Once the console port of PLANET WLS-1280 is connected properly, the console main screen will appear
automatically. If the screen does not appear in the terminal simulation program automatically, please try to press
the arrow keys, so that the terminal simulation program will send some messages to the system and the
welcome screen or the main menu should appear. If you are still unable to see the welcome screen or the main
menu of the console, please check the connection of the cables and the settings of the terminal simulation
program.