Planet Technology WLS-1280 - Manual (Page 12)

9
3.1.3 Panel Function Descriptions
Front Panel
y LED: There are four kinds of LED, PWR, Status, WAN and LAN LED, to indicate different status of the system.
y WAN1/WAN2: The two WAN ports are connected to a network which is not managed by PLANET WLS-1280
system, and this port can be used to connect the ATU-Router of ADSL, the port of Cable Modem, or the Switch
or Hub on the LAN of a company. WAN2 doesn’t support load balance with WAN1
y LAN1~LAN8: Client machines connect to PLANET WLS-1280 via LAN ports. Each LAN port can be configured
to one of two roles, controlled or uncontrolled. The differences of these two roles for a client connected to are:
¾ Clients connected to controlled port to need authentication to access network.
¾ Clients connected to uncontrolled port can access the web management interface.
Rear Panel