Planet Technology WLS-1280 - Manual (Page 118)

115
MAC Address The MAC address of the WAN2 port.
IP Address The IP address of the WAN2 port. WAN2
Subnet Mask The Subnet Mask of the WAN2 port.
Mode The mode of the controlled port.
MAC Address The MAC address of the controlled port.
IP Address The IP address of the controlled port.
Controlled
Subnet Mask The Subnet Mask of the controlled port.
Status
Enable/disable stands for status of the DHCP server on
the controlled port.
WINS IP Address The WINS server IP. N/A means that it is not configured.
Start IP Address The start IP address of the DHCP IP range.
End IP address The end IP address of the DHCP IP range.
Controlled
DHCP Server
Lease Time Minutes of the lease time of the IP address.
Mode The mode of the uncontrolled port.
MAC Address The MAC address of the uncontrolled port.
IP Address The IP address of the uncontrolled port.
Uncontrolled
Subnet Mask The Subnet Mask of the uncontrolled port.
Status
Enable/disable stands for status of the DHCP server on
the uncontrolled port
WINS IP Address The WINS server IP. N/A means that it is not configured.
Start IP Address The start IP address of the DHCP IP range.
End IP address The end IP Address of the DHCP IP range.
Uncontrolled
DHCP Server
Lease Time Minutes of the lease time of the IP address.
4.6.3 Current Users
In this function, each online user’s information including Username, IP, MAC, Pkts In, Bytes In, Pkts Out, Bytes
Out, Idle, Source AP and Kick Out can be obtained. Administrator can use this function to force a specific online
user to log out. Just click the hyperlink of Kick Out next to the online user’s name to logout that particular user. Click
Refresh to renew the current users list.