Planet Technology WLS-1280 - Manual (Page 130)

127
1-2. Using DHCP: If want to use DHCP, please
choose “Obtain an IP address automatically”
and click OK. This is also the default setting of
Windows. Then, reboot the PC to make sure an
IP address is obtained from PLANET
WLS-1280.
2-2. Using Specific IP Address: If want to use
specific IP address, you have to ask the network
administrator for the information of PLANET
WLS-1280: IP address, Subnet Mask, New
gateway and DNS server address.
y Please choose “Use the following IP
address” and enter the information given
from the network administrator in “IP
address”, “Subnet mask” and the “DNS
address(es)” and then click OK.