beautypg.com

Planet Technology WLS-1280 User Manual

Page 58

background image

55

y Trans Full Name: When enabled, the ID and postfix will be transferred to the RADIUS server for authentication.

When disabled, only the ID will be transferred to RADIUS server for authentication.

y NASID: Enter the NASID of PLANET WLS-1280 for the RADIUS server.

y Server IP: Enter the IP address/domain name of the RADIUS server.

y Authentication Port: Enter the authentication port of the RADIUS server and the default value is 1812.

y Accounting Port: Enter the accounting port of the RADIUS server and the default value is 1813.

y Secret Key: Enter the key for encryption and decryption.

y Accounting Service: Select this to enable or disable the “Accounting Service” for accounting capabilities.

y Authentication Protocol: There are two methods, CHAP and PAP for selection.

y Policy Mapping: Enable or disable policy mapping by RADIUS class attributes.

y