Managing incoming calls, Distinguishing calls, Rejecting calls – Polycom SoundStation IP 6000 User Manual
Page 43: Managing incoming calls -23, Distinguishing calls -23 rejecting calls -23
Customizing Your Phone
2 - 23
To place a call to a contact in the Corporate Directory:
1.
Press
, and then select Features > Corporate Directory.
The Corporate Directory screen displays.
2.
Scroll to the contact you want to call. Or, search for the contact (see
Searching for Contacts in a Corporate Directory
on page
You can also use the * key to Page Up and the # key to Page Down.
3.
Press the Dial soft key.
Managing Incoming Calls
You can manage incoming calls from the contacts in your directory by doing
the following:
• Setting up a distinctive ring tone for a contact.
• Rejecting calls from a particular contact by sending the call to your
voice mail system. (If you do not have a voice mail system set up, the call
will still ring on your phone.)
• Diverting calls from a particular contact to another party.
Distinguishing Calls
You can customize your phone so that you can distinguish callers by certain
ring tones. For information on setting a distinctive ring tone for a particular
contact, see
Setting Distinctive Ring Tones for Contacts
on page
Rejecting Calls
You can customize your phone so that incoming calls from a particular party
are immediately sent to your voice mail system. (If you do not have a voice
mail system set up, the call will still ring on your phone.)
Note
Rejecting calls is not available on shared lines.