Printronix T5000R - Manual (Page 73)

Specification Check-General — X'02'
71
Explanation:
1. The Coordinate Definition value on the Write Image Control command is
not a valid or supported value.
2. The First Pel Location (X or I Direction) value on the Write Image Control
command is not a valid or supported value.
3. The First Pel Location (Y or B Direction) value on the Write Image Control
command is not a valid or supported value.
Alternate Exception Action: None.
Explanation: The Color value of the WIC command is not a valid or
supported value.
Alternate Exception Action: Use printer default value
Explanation:
1. The text color is not a valid or supported value.
2. The text color precision is not a valid or supported value.
Alternate Exception Action: If the attribute value is not valid, ignore the
control and continue presentation with the value that was in effect prior to this
control sequence. If the attribute value is valid but unsupported for this printer,
use the printer default color.
Explanation: On the Load Page Description command, the X units per unit-
base value is not a valid or supported value.
Alternate Exception Action: None.
X '024A01' Invalid WIC Coordinate Specification
X '025301' Invalid WIC Color Value
X '025803' Unsupported Color or Color Attribute
X '026002' Invalid LPD X Units/Unit-Base