Printronix T5000R - Manual (Page 67)

Specification Check-General — X'02'
65
Explanation:
1. The value of the intercharacter adjustment is not a valid or supported
value.
2. The intercharacter adjustment direction is not a valid or supported value.
Alternate Exception Action:
1. Ignore the control sequence and continue presentation with the
parameter values according to the hierarchy (the hierarchy is the last
valid value received or if none received then use the LPD value).
2. Use direction = zero.
NOTE: In an LPD command, no Alternate Exception Action occurs.
Explanation: The Absolute Move Baseline parameter value is not a valid or
supported value.
Alternate Exception Action: None.
Explanation: The Absolute Move Inline parameter value is not a valid or
supported value.
Alternate Exception Action: None.
Explanation: The single byte font specified by the Delete Font command is
not in the machine.
Alternate Exception Action: None.
Explanation: The Loaded Font Identifier field is required in the Delete Font
command; however, it is not present or its value is not a valid or supported
value.
Alternate Exception Action: None.
X '021201' Invalid Intercharacter Adjustment
X '021301' Invalid Absolute Move Baseline Value
X '021401' Invalid Absolute Move Inline Value
X '021402' Font to be Deleted Not Found
X '021502' Invalid DF Font