Printronix T5000R - Manual (Page 54)

52
Appendix B
Explanation:
The bar code modifier, byte 17 of the Bar Code Data Descriptor structured
field, is not a valid or supported value for the bar code type specified by byte
16 of the same structured field.
Alternate Exception Action: None.
Explanation:
The length of the variable data (as given in bytes 5-n of the Write Bar Code
command) to be bar-encoded/printed, plus any printer-generated check digits
to be coded/printed, is not a valid or supported value.
Alternate Exception Action: None.
Explanation: A first check digit calculation resulting in a value of 10 is defined
as an error in various of the modifier options (byte 17 of the Bar Code Data
Descriptor structured field) for the MSI bar code.
Alternate Exception Action: None.
Explanation: HRI location specified in the FLAGS byte of the WBC
command is not a supported location.
Alternate Exception Action: None.
Explanation:
1. A portion of the bar code presentation space, as mapped into the object,
extends outside the bar code object boundaries, or a portion of the bar
code object extends outside of the logical page (or current overlay).
2. An attempt is made to print a bar code symbol or HRI outside the physical
page.
3. The symbol reference point lies outside the bar code object, presentation
space, or logical page (or current overlay).
Alternate Exception Action: None
X '040B00' Invalid Bar Code Modifier
X '040C00' Invalid Bar Code Data Length
X '040E00' Check Digit Calculation Error
X '041000' HRI Location Not Supported
X '041100' Attempt to Print Portion of Symbol Outside Object or VPA