Printronix T5000R User Manual
Page 69
Specification Check-General — X'02'
67
Explanation: The one-byte Local Identifier value in the Load Font
Equivalence command has been used more than once, making the Two-Byte
Font Identifier reference ambiguous.
Alternate Exception Action: None.
Explanation: A text control sequence contains a code other than X'D3'
following X'2B'.
Alternate Exception Action: None.
Explanation: One or more of the following font parameters listed in the LFE
or their combination is not valid or supported: Character Set ID, Code Page
ID, Uniform Character Increment, and Proportional Increment Coefficient
Table.
Alternate Exception Action: None.
Explanation: The length of a text control is not valid.
Alternate Exception Action: None.
Explanation:
1.
The combination of parameters specified in LFE are not supported
together with the quality indicated by XOA Print Quality Control.
2.
The Font (Style) ID specified in the LFE is invalid or unsupported or is not
valid with the other font parameters.
Alternate Exception Action: Choose “Best Fit” font.
NOTE: This error will be flagged when an attempt to present the font is
processed.
X
'021902' Multiple Occurrences of the Same LFE Local ID
X
'021C01' Invalid Embedded Text Control Sequence
X
'021D02' Invalid LFE Identifier
X
'021E01' Invalid Text Control Length
X
'021E02' Mismatch Between Font and XOA Print Quality Control