Patton electronic FORESIGHT 6300 - Manual (Page 73)

Configuring IP Routing 73
FS6300 NMS User Manual 5 • Configuring the 2616RC Card
Add Routes
To add an IP route to the 2616RC:
1. In the IP Overview window for the 2616RC, click the Add button to define a new route.
Figure 62. Add a New Route for 2616RC
2. Enter a Destination address for the new route. An entry with a value of 0.0.0.0 is considered a default
route.
3. Enter a Gateway address for the new route. The gateway address specifies the IP address where the packets
should be forwarded.
4. Click Define Route.
Modify Routes
To modify an existing IP route for the 2616RC:
1. In the IP Overview window for the 2616RC, select the entry in the table of the route you want to modify.
Figure 63. Modifying a Route for 2616RC
2. The IP Route Details window displays. You may only modify the gateway address, cost, and state of the
route.
3. Enter your desired changes and click Modify for each change. A confirmation message displays.