Patton electronic FORESIGHT 6300 - Manual (Page 18)

Logging into the Application Client 18
FS6300 NMS User Manual 1 • Introduction
Configuring Your Password
Configuring your password before connecting to the client
When you log on to the Application Client for the first time, a Password Confirmation dialog box is displayed
(only if this has been enabled by your administrator). If you do not see this dialog box, then ignore this section
and perform the steps explained in the next section,
“Configuring your password from the client” on page 18 .
To configure your password before connecting to the client:
1. In the Password Confirmation dialog box, click Reuse to continue using the same password for the same
period as previously configured. To enter a new password, click Configure and perform further steps.
2. Enter the new password in the Type new password field.
3. Re-enter the same password in the Confirm new password field.
4. Enter the number of days you want your password to be valid in Password expiry duration. If no value or
zero is entered in this field, then the password never expires.
5. Click Connect.
The new password is assigned to you and you are connected to the Application Client. You need to use this
new password from the subsequent login.
Configuring your password from the client
1. After logging into the client, select Security Administration from the Tools menu. Select the user from the
users list, and click Edit in the Menu bar. Select Change Password. The Password Configurator window is
displayed.
2. Enter the new password in the New Password field.
3. Re-enter the same password in the Confirm Password field.
4. Click OK. The new password is assigned to the user.