beautypg.com

Defining the brands of your devices – Philips intelligent remote control User Manual

Page 9

background image

Getting Started

7

Defining the Brands of Your Devices

The Remote Control uses RC codes to activate devices. Because there are several

brands using specific RC codes, you have to define the brands of your devices.

In the Home menu you find buttons for the most common video and audio devices.

The Remote Control is set up by default to operate with Philips or Marantz devices.

1. Select a device in the Home menu.

The following screen appears.

2. When the brand of your device is Philips or Marantz, click No.

The Remote Control switches to Use mode. To operate the device in Use mode,

see p. 14.

-or-

When you want to adjust the Remote Control to operate with your brand, click

Yes.

The Remote Control switches to Brand mode. Follow the instructions as

described below. You can define your brands by selecting or by searching.

Note

Before you start using the Remote Control, make sure you define the brand

for each device you want to operate in the Home Menu.

This manual is related to the following products: