Philips intelligent remote control - Manual (Page 35)

Getting the Maximum out of it 33
8 Scroll down to display the second timer control panel in which you can set the
stop time.
9 Enter the command the timer has to execute.
10 Tap the clock button and set the stop time using the Left/Right buttons.
11 Press the Left button to close the timer.
A confirmation screen appears where you can save or cancel the timer.
12 Tap Save.
The timer is activated.
Note
The timer only works when the Remote ControlÕs sending eye is pointed
towards the controlled device and no obstructions interfere the infrared signal.
Editing timers
You can edit any timer you have set.
1 Open the timer group that contains the timer.
2 Switch to Edit mode via the Mode button .
3 Tap the timer you want to edit.
The contents of the timer appear.
4 Edit the timer.
5 Press the Left button to close the timer.
A confirmation screen appears where you can save or cancel the timer.
6 Tap Save.
The timer is edited.
Organizing macros and timers into groups
You can create as many macro groups or timer groups as you like. Each group
can contain up to 25 macros or timers.
1. Open any macro or timer group.
2. Switch to Add mode via the Mode button .
You can create a new group, copy an existing group or restore a previous
deleted group.
· Create New Group: You add a new group in which you can record new
macros or set new timers.
· Copy Existing Group: You copy a group and its macros or timers and use
it for new macros or timers.
· Restore Deleted Group: You restore a deleted group and reuse the macros
or timers.
3 Tap Create Macro Group or Create Timer Group.