Philips intelligent remote control - Manual (Page 19)

Getting Started 17
Second setup panel
Setting Function Adjusting
Level Turns the backlight always on
or off when activating the
touch screen.
Note: When you choose
always off, you can only
activate the backlight using
the backlight button.
Always on: Tap the Level
button and position the
indicator in the left half of the
indication bar using the Left
button.
Always off: Tap the Level
button and position the
indicator in the right half of
the indication bar using the
Right button.
Mode Menu Hides or shows the Mode
button.
Tap the Mode Menu button.
Touch Adjusts or turns off the touch
screen beep.
Tap the Touch button
repeatedly.
Button Adjusts or turns off the beep
of Left/Right and direct-access
buttons.
Tap the Button button
repeatedly.
Calibrate Calibrates the touch screen. Tap the Calibrate button and
follow the on-screen
instructions.
Revert Reverts the Remote Control to
the factory default
configuration.
Tap the Revert button and
follow the on-screen
instructions.
Third setup panel
This panel provides technical information about your Remote Control.
To exit Setup Mode
· Tap the Setup label on the Remote Control icon.
The Remote Control returns to Use mode.