Philips intelligent remote control - Manual (Page 29)

Getting the Maximum out of it 27
Moving a device, macro group or timer group
You can change the order in the Device menu and the Macro menu. Changes you
make in the Device menu are automatically updated in the Home menu.
1 Make sure the device tab or macro tab is active.
The device or macro tab is active when the name of a device, macro or timer
is displayed.
2 Switch to Move mode via the Mode button .
The Remote Control displays the menu.
3 Tap the device or group you want to move.
The menu item is highlighted.
4 Use the Left and Right button to move the menu item up or down.
5 Tap Accept to save the changes.
You return to Use mode.
Deleting and Restoring
Deleting
You can delete the following elements:
· control panel buttons and actions associated with a direct-access or a
Left/Right button,
· device actions,
· devices, macro groups and timer groups.
Home menu buttons cannot be deleted directly. You have to delete them via the
Device menu (see p. 28).
Note
Buttons that are programmed in Learn mode and deleted afterwards, will
disappear on the control panel. When you redefine the device in Brand mode,
those buttons will stay empty. You will have to program them in Learn mode
again.