Philips intelligent remote control - Manual (Page 12)

Getting Started 10
7. Select a code set from the list.
The selected code set becomes black. The Search button switches to Next.
8. Tap Next.
The Remote Control switches to Try mode. The first control panel of the
selected device is displayed.
9. Try out the buttons on the different control panels and check if the device is
responding to the RC codes the Remote Control is sending.
Note
Even when your device is responding to the current code set, it is advised to
try out other code sets. When your device responds to more then one code set,
install the most suitable one.
10. When you are not satisfied with the way the device is responding to the
selected code set, tab Back to select another code set.
-or-
When you are satisfied with the selected code set, tap Install.
When the RC codes for your device are installed, the Remote Control beeps
and returns to Use mode. Your brand is now defined for the selected device.
11. Define all other devices in the Home menu you want to operate.