Philips intelligent remote control - Manual (Page 20)

Getting the Maximum out of it 18
Getting the Maximum out of it
Introduction
The Remote Control is set up by default to operate with Philips or Marantz devices.
When you have other brands, you can define the brands for your devices and install
the RC codes to activate those devices.
What makes the Remote Control so powerful is the ability to extend its
functionality in multiple ways like programming additional functions, adding
supplementary devices, recording macros and customizing the interface as it suits
you best.
Working with Modes
When you operate your devices, the Remote Control is in Use mode. For actions
other than operating (like learning buttons, recording macroÕs, adding devices,
and so on) you have to switch to the appropriate mode:
For operating devices.
For learning commands from other
devices.
For recording macros and setting
timers.
For labeling buttons and commands.
For adding new devices.and macros
For deleting buttons, actions, devices
and macros.
For changing the order in a menu.
For defining brands using the
Remote ControlÕs database