Philips intelligent remote control - Manual (Page 46)

Specifications 44
Specifications
The specifications and design of this product are subject to change without notice.
Hardware High-resolution (320 x 240) liquid crystal display (LCD) with
contrast control
Large touch screen
Seven programmable direct-access buttons
Backlighting for LCD and direct-access buttons
Built-in Philips-Marantz RC codes`
Database with RC codes to operate different brands
Infrared sending and learning eyes
3-wire (RS232) serial port connector
Software Dynamic, animated interface
Editable macros (up to 255 commands per macro)
Total number of devices and macros limited only by memory
Infrared (IR) Operating distance of 10 meters (33 feet)
Learning frequency up 56 KHz
Learning distance 5 cm (2 inch) up to 30 cm (1 foot)
Memory Non-volatile flash memory (retains commands when batteries
are not present)
512 K SRAM
Batteries 4 AA 1,5V batteries, or one 4,8V rechargeable battery pack
Battery life Approximately 6 months with typical use
Power
management
Power on by tapping the touch screen, power off automatically
Dimensions 138mm x 92mm x 38mm (5.4 inch x 3.6 inch x 1.5 inch)
Operating
temperature
0¡C to 50¡C (32¡F to 122¡F)