Philips intelligent remote control - Manual (Page 6)

Introduction 4
Optional recharging dock
Warning
Use the recharging dock only with the Philips NiMH rechargeable battery
pack.
1 Slide the battery door off the back of the Remote Control.
2 Remove the plastic AA battery tray from the battery compartment.
3 Insert the battery pack (included with the recharging dock) as indicated on the
side of the battery pack.
4 Slide the battery door back on.
After a few seconds, the Remote Control starts up automatically and beeps
twice to indicate that it has finished starting up.
5 Plug the power adapter into a wallet outlet and connect it to the recharging
dock.