Paradyne 8784 - Manual (Page 29)

3. Initial Startup and Configuration
8784-A2-GB20-30 February 2001 3-5
See Appendix A, Configuration Options , for a list and explanation of the
configuration options available.
Configuration Loader
The Configuration Loader screen allows you to upload configurations to and
download configurations from a TFTP server. To access the Configuration Loader
screen, follow this menu selection sequence:
Main Menu
→
Configuration
→
Configuration Loader
Select . . . To Access the . . . To Configure the . . .
Network Network Interface Options ( Table A-1 ) DSL network interface
Ports 1–2.
DSX-1 DSX-1 Interface Options ( Table A-2 ) DSX-1 interface
Ports 1–2.
Copy Ports Copy Ports Options ( Table A-3 ) DSL network and DSX-1
interface ports by copying
options from port to port.
System Options System Options ( Table A-4 ) General system options of
the unit.
Management
and
Communication T Telnet Session Options ( Table A-5 )
T General SNMP Management Options
(
Table A-6 )
T SNMP NMS Security Options
(
Table A-7 )
T SNMP Trap Options ( Table A-8 )
Management support of
the unit through SNMP
and Telnet.
main/config/config_loader Hotwire
Slot: 4 Model: 8784
CONFIGURATION LOADER
Image File Name: Clear
TFTP Server IP Address: 000.000.000.000 Clear
TFTP Transfer Direction: Download from Server
Destination: DSL1
Start Transfer: Yes
Packets Sent: 0000000
Packets Received: 0000000
Bytes Sent: 0000000
Bytes Received: 0000000
Transfer Status: Transfer Pending
Activate new configuration? No
-------------------------------------------------------------------------------
Ctrl-a to access these functions, ESC for previous menu MainMenu Exit