Paradyne 8784 - Manual (Page 14)

1. About the Hotwire 8784 Termination Unit
1-4 February 2001 8784-A2-GB20-30
SNMP Management Capabilities
The Hotwire 8784 Termination Unit supports SNMP Version 1, and can be
managed by any industry-standard SNMP manager and accessed using SNMP
by external SNMP managers.
Management Information Base (MIB) Support
For a detailed description of supported MIBs, visit Paradyne’s Web site at
www.paradyne.com. The following MIBs are supported:
T MIB II (RFC 1213 and RFC 1573) – Defines the general objects for use with a
network management protocol in TCP/IP internets and provides general
information about the unit. MIB II is backward-compatible with MIB I.
T DS1/E1 MIB (RFC 1406) – Reports the performance status of the DSX-1
interface and supports the features found on the DSX-1 Performance Statistics
screen.
T Paradyne Enterprise MIB – Supports configuration, status, statistics, and
tests.
Select Clear to reset a field to a null value.
SNMP Trap Support
The Hotwire 8784 Termination Unit supports traps as defined in RFC 1215.
01-16114a-03
DSX-1
8600 Series
DSLAM
Network
7984
AC
INPUT AC
48VDC CLASS 2 OR LIMITED PWR SOURCE
RTN 48V A A B B
T5A
2
4 6
A B
. . . 3 . 1 2 POSITION STACK ALM A IN B
DC FUSES T4A, MIN. 48V 5 DC PWR FAN
OUT SERIAL MCC 1 3
1
2
3 SYSTEM OK Alr m Test
250V SYSTEM OK Alr m Test 1 2 3 4 G.703 ALRM DSL POR T
LINK-UP 1 2 3 4
SYSTEM OK Alr m Test 1 2 3 4 G.703 ALRM DSL POR
T
LINK-UP SDSL 8715 1 2 3 4
Router
SNMP NMS
Ethernet
Interface
TDM SDSL
EOC
Data
Operation, Maintenance
and Provisioning Center
Ethernet
LAN
1 2 3 4 G.703 ALRM DSL POR T
LINK-UP 1 2 3 4
8784